éditions des archives contemporaines

Controllable Supercooling in Phase Change Materials-Advances in Triggering Methods, Lab-Scale Investigations, and Prototype Demonstrations

  1. 1Department of Architecture and Built Environment, The University of Nottingham, UK NG7 2RD / Solar Energy Research Institute, Universiti Kebangsaan Malaysia, 43600, Bangi Selangor
  2. 2Department of Architecture and Built Environment, The University of Nottingham, UK NG7 2RD
  3. 31Department of Architecture and Built Environment, The University of Nottingham, UK NG7 2RD
DOI10.17184/eac.9501 non déposé
Pages1–25
Paru le25 juillet 2025
Citer Lire en PDF · 25 p.

Résumé

Supercooled Phase Change Materials (PCMs) offer significant advantages for thermal energy storage by enabling latent heat retention over extended periods with minimal loss. However, controlling crystallization in supercooled states remains a critical challenge for practical applications. This review provides a comprehensive analysis of lab-scale experimental studies on controllable supercooling in PCMs, categorized by triggering methods such as local cooling, mechanical agitation, bubble injection, electric and ultrasonic fields, mechanical shock, and cold crystallisation. Furthermore, the transition of these control techniques into physical prototypes is discussed, highlighting operational challenges and integration issues observed in heat pads, thermal batteries, battery preheating systems, and long-term thermal energy storage units. Despite substantial progress, scaling up supercooled PCM systems introduces new barriers, including premature crystallization, inconsistent triggering, and material degradation. Addressing these challenges through prototype-scale research is critical to achieving reliable, cost-effective thermal energy storage solutions utilising supercooled PCMs as controllable thermal energy storage.

Mots clés
supercooled PCMscontrollabletriggeringprototype

Abstract

Supercooled Phase Change Materials (PCMs) offer significant advantages for thermal energy storage by enabling latent heat retention over extended periods with minimal loss. However, controlling crystallization in supercooled states remains a critical challenge for practical applications. This review provides a comprehensive analysis of lab-scale experimental studies on controllable supercooling in PCMs, categorized by triggering methods such as local cooling, mechanical agitation, bubble injection, electric and ultrasonic fields, mechanical shock, and cold crystallisation. Furthermore, the transition of these control techniques into physical prototypes is discussed, highlighting operational challenges and integration issues observed in heat pads, thermal batteries, battery preheating systems, and long-term thermal energy storage units. Despite substantial progress, scaling up supercooled PCM systems introduces new barriers, including premature crystallization, inconsistent triggering, and material degradation. Addressing these challenges through prototype-scale research is critical to achieving reliable, cost-effective thermal energy storage solutions utilising supercooled PCMs as controllable thermal energy storage.

Keywords
supercooled PCMscontrollabletriggeringprototype

Lire l’article

Première page

PDF de 25 pages, tel qu’imprimé dans la revue, pages 1 à 25. En libre accès.

Pas encore de consultation enregistrée.